Quick Introduction of Autel 5 in 1 MaxiFlash VCMI

As a communicator between the vehicle and the scanner, Autel MaxiFlash VCMI can convey vehicle fault information, send scanner instructions to the car central control, repair car fault codes, and ECU Coding and ECU Programming, but Autel MaxiFlash VCMI is more than just that.

What's the Autel MaxiFlash VCMI?

Autel MaxiFlash VCMI is an advanced 5-in-1 tool, the new MaxiFlash VCMI has the functions of a 4-channel oscilloscope, waveform generator, multimeter and CAN BUS tester.

Oscilloscope: An electronic measuring instrument capable of displaying the dynamic waveform of a voltage signal.

Waveform generator: A data signal generator that generates real waveforms. The various signals generated are often used to stress test devices for communication protocols.

Multimeter: A magnetoelectric instrument with a rectifier that can measure various electrical parameters such as AC and DC current, voltage and resistance.

CAN BUS tester: a detection and analysis equipment for testing CAN bus.

The powerful multifunctional connector MaxiFlash VCMI has features worth more than $2000 on the market. Through VCMI with new CAN BUS protocols (latest DOIP and CAN FD BUS) and OE diagnostic protocol standards (D-PDU/J2534/RP1210) you can use it with original OE diagnostic scanners for programming.

Which scanners does Autel MaxiFlash VCMI work with?

Autel scanners have their fixed VCI adapter combination, and unsuitable VCI will not be able to communicate with the vehicle. Autel MaxiFlash VCMI can only communicate with Autel Ultra and Autel MS919 scanners.